Mustang Distributor Install: Performance Distributors Hot Forged Aluminum Distributor 86-93 5.0L

86-93 Mustang 5.0L Hot Forged Aluminum Distributor:
http://www.latemodelrestoration.com/products/86-93-Mustang-Distributor-Install

Are you replacing your worn out ignition coil and wires? Or do you have a worn out stock distributor giving you issues? Then you are in need of the Performance Distributors 1986-93 Mustang 5.0L Hot Forged Aluminum Distributor. This drop in ready distributor will ensure you get the most out of your Mustang ignition coil and plug wire upgrade. If you are currently having TFI module issues or have a worn rotor and cap then this makes a great upgrade for your 5.0L Mustang.

In the video Jmac walks you through removal of your stock Mustang distributor and shows you how to install the new Mustang Performance Distributors Hot Forged Aluminum Distributor. The 1986-93 Mustang 5.0L Hot Forged Aluminum Distributor features a hot forged aluminum housing, new cap and rotor, includes a Dyna-Mod TFI Module and is compatible with roller cam.

SAVE TIME AND MONEY BY BUYING THE PDI HIGH PERFORMANCE IGNITION KIT
http://www.latemodelrestoration.com/item/PDI-184724BK/1986-1993-Mustang-High-Performance-Ignition-Kit
includes:
Mustang Livewire Plug wires
Mustang Screamin Demon Ignition Coil
Mustang Hot Forged Aluminum Distributor
Mustang Wire Looms by Taylor

Fit Ford Mustang LX, GT, Cobra 5.0L – 1986 (86) – 1987 (87) – 1988 (88) – 1989 (89) – 1990 (90) – 1991 (91) – 1992 (92) – 1993 (93)
Video Rating: / 5

14 replies
  1. Fernando Hernandez
    Fernando Hernandez says:

    hey LMR can you guys make a video on the engine breather you have where the oil cap goes ?? what dose it do??

  2. Robert Escamilla
    Robert Escamilla says:

    I have a stock distributor with a msd 6 box.if I install a msd distributor will it give me more power or stays the same but trouble free

  3. James Voss
    James Voss says:

    I am sorry I noticed that the 94 distributor wire were u plug the distributor in has a different plug from my 92 5.0 can I just put a 92 distributor in the 94 5.0

  4. dondon8978
    dondon8978 says:

    i have the harness for the 95 i was wondering which wires to connect the 93 has three hot with key on how about the 95 thanks

  5. Johnny CincoCero
    Johnny CincoCero says:

    Wish my distributor were that easy to come off. Its stuck. Not budging. Hitting it with penetrating lube to see if it loosens it up. Any other suggestions?

  6. Anthony Selca
    Anthony Selca says:

    Doesn't it have to be at top dead center? Or as long as you put it in the same position as the old one you should be good?

  7. Ruben Rodriguez
    Ruben Rodriguez says:

    +LatemodelRestoration.com can I purchase the hot forged distributor along with the screaming demon and the Ford racing wires on a stock 1992 Mustang gt?

  8. Late Model Restoration
    Late Model Restoration says:

    Give us a call and we will be glad to help you out! Use discount code Save10 on your next order over $200 for a little extra in savings.

Comments are closed.